Electrical work in Ann Arbor
Ann Arbor is one of the few Michigan cities that lists a rebate for the electrical panel itself. The A2ZERO Home Energy Rebates page shows up to $2,000 for a main panel replacement of at least 200 amps (market-rate households $1,000), with contractor installation required and the rebate capped at 90 percent of cost. The page shows no closure notice and no date, so confirm the status before you sign for a panel upgrade.
Its electric vehicle rebate section reads "No Longer Accepting Applications." Permits run through the city's Building, Rental and Inspection Services at 301 E. Huron St., phone 734-794-6263, using the STREAM portal; LARA's Statewide Jurisdiction List shows electrical enforcement as local. The city's fee sheet is dated January 2020 and lists a $15 base application and $35 per inspection, so check with your city for current figures. DTE Electric is the only electric territory the state's map shows in Ann Arbor (confirm by address), and DTE's home EV charger rebate is income-qualified with no dollar amount printed (as of Oct 19, 2026; availability can change).
Housing runs 64.3 percent pre-1980 with a median value of $435,100. BLS lists Ann Arbor electricians at a mean $38.24 and a median $39.16 an hour, which is pay, not price. Within reach are Ypsilanti at 6.0 miles and South Lyon at 13.4.
What electrical work costs near Ann Arbor
We have collected no quotes for Ann Arbor, so there is no price for the city itself. The statewide estimates are on each service page, and the Michigan page lists them with what electricians are paid (the Michigan mean in BLS data for May 2025 is $35.50 an hour, which is pay, not price) and the permit fees we could read. How we estimate costs.
Permits for electrical work in Ann Arbor
Many cities run their own building department, so start by asking the City of Ann Arbor building department who issues electrical permits.
LARA's permit page says no one may alter or add to electrical conductors without a permit, so wiring additions generally need one. Replacing a switch or receptacle is on the state's permit-exempt list. Read the permit guide
Electrical jobs in Ann Arbor
The short answer to each job, as it applies across Michigan. Each links to the full page with the cost evidence, permit rules and what to try first.
- Emergency electrician in Ann ArborIf you see sparks, smoke or flames, smell burning, or have water reaching the panel or outlets, leave the building and call 911 before you call an emergency electrician. A lost circuit, a breaker that will not stay on or a warm outlet is urgent but not a 911 call, and it is the job an emergency electrician is for.
- Panel upgrade in Ann ArborAn electrical panel upgrade in Michigan involves three parties: a licensed electrician who does the work, the enforcing agency that inspects it, and your utility, which connects power only afterward. A panel replacement is not on the state's list of permit-free jobs, so plan for a permit and ask your city's electrical office to confirm.
- Outlet and switchOutlet repair usually means finding why one receptacle or switch has gone dead, loose or warm, and replacing the device or fixing the connection behind it. Michigan does not require a permit to replace a receptacle or switch.
- EV charger in Ann ArborEV charger installation at home usually means a new 240 volt circuit to a wall unit or outlet, and the federal Department of Energy says most residential Level 2 units call for a dedicated 40 amp circuit. No LARA sentence says chargers need a permit, but state and city fee schedules list an EV charging line, so plan on one.
- Generator installWhole house generator installation is two jobs joined together: the unit and its fuel supply outside, and a transfer switch that isolates your house from the utility wires. Consumers Energy says a permanent installation should be done by a licensed electrical contractor, with permits and inspections.
- LightingRecessed lighting installation in an existing ceiling usually means cutting holes in finished drywall and running new cable to each light, which Michigan treats as an addition to electrical wiring. Swapping a light fixture or a switch for like equipment is on the state's permit-exempt list, but new circuits and new fixture locations are not.
- RewiringHouse rewiring in Michigan means replacing the cable behind your walls, and LARA's permit page says no one may alter or add to electrical conductors without a permit. For aluminum wiring, federal safety regulators call complete copper rewiring the best method available.
- Ceiling fanCeiling fan installation in Michigan turns on the wiring: a fan that takes the place of a light is one job, and a fan that needs new cable is another. Replacing switches and receptacles is on the state's permit-exempt list, but a hardwired fan is not named there, and new wiring is an addition that needs a permit.
- Surge protectionA whole-house surge protector is a device wired in at your electrical service to limit voltage spikes before they reach the circuits in the house. Installing one is electrical wiring work at the panel, so in Michigan it takes a licensed electrician, or an owner-occupant under the homeowner exemption, with a permit and inspection.
- Electrical inspectionAn electrical inspection in Michigan usually means the enforcing agency's inspection of permitted work, which is the step that authorizes the power company to connect. A separate condition check of an existing house is something you order from an electrician, and we found no Michigan checklist for it.
- Smoke detectorsSmoke detector installation in Michigan splits into a statute and some guidance. State law requires a carbon monoxide device in certain new, renovated and added-bedroom cases, and the state fire bureau advises smoke alarms on every level and in every bedroom.
More on Michigan electrical work
Licensing, the electrical code, permits and what a quote should say are covered once for the whole state on the Michigan page. To check an electrician, read how to find a licensed electrician in Michigan.